|
|
|
|
|
|
|
|
|
|
|
|
|
The low-cost, compact timer comes standard in a 17.5 mm DIN rail mount housing with a 5 amp SPDT relay output contact configuration and user-selectable time ranges, from 0.1 second up to three hours. In addition, the unit is easily configured via its front knobs for time range, time scale and mode setting. The ATC Model 175MU is both UL listed and CE certified.
The Model 175MU DIN Rail Mount Multifunction Industrial Timer offers a universal supply voltage of 20-240 VAC (50/60 Hz) and 12-240 VDC, 13 unique functions, and 10 timing ranges within a single unit.
|
Knob Adjustable, AC or DC, Delay on Operate, Solid State, Universal Cube Timer
|
The low-cost, compact timer comes standard in a 17.5 mm DIN rail mount housing with an 8 amp SPDT relay output contact configuration and user-selectable time ranges from 0 to 999 seconds, minutes and hours. In addition, the unit is easily configured via its front keypad for time range, time scale and mode setting. The Model 175MD is both UL listed and CE certified.
The Model 175MD DIN rail mount multi-function timer features a universal supply voltage of 20-240 VAC (50/60 Hz) and 20-240 VDC. It also offers 15 unique timing functions and 8 unique timing ranges, with keypad setting and display capabilities, all within a single unit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 405AR timer from Automatic Timing and Controls offers: On Delay / Interval Timing Modes: The 405AR has two modes of operation, On Delay or Interval timing modes. The unit has a set DPDT output contacts rated for 10 amps resistive. When in ON-Delay Mode, the contacts transfer at time out. When in the interval Mode, the contacts transfer when power is applied and released at time out. Universal Power: All 405 AR timers can be powered using 20 to 240V AC or 12 to 240V DC power, reducing inventory management of replacement units. 1/16 DIN Housing: The 48mm (1/16 DIN) housing is compact and rated for P40 on the face plate. The 405AR is mounted in a 8-pin round socket. The dial on the 405AR is extra large and easy to read. When fractional ranges are selected, decimal points are clearly marked. The Mode select and Range select switches are located on the front of the unit, so that when panel mounted allows quick change of mode or range of the unit.
|
RELAY
|
Off Delay Timer with a DPDT Contact Form, a 10A Current Rating and a 277VAC Coil.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Relay Output with CSA, 110/120 Volts AC or DC, Knob Adjustable, 8 or 11-Pin octal plug-in, .1 to 10 seconds
|
Specialty relay. Discontinued.
|
RELAY
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TIME DELAY RELAY, SPDT, 120V; Contact Configuration: SPDT; Nom Input Voltage: 120V; Timing Adjustment:Knob; Relay Mounting:Panel. 11 Pin, TDU Series.
|
120 Volts AC/DC, 0.1 to 102.3 Seconds in 0.1 Sec. Increments
When supply voltage is applied to the input, the OFF time (T1) begins. Upon completion of the OFF time, the relay energizes and the ON time (T2) begins. Upon completion of the ON time, the relay de-energizes and one cycle is complete. This OFF/ON cycling continues until supply voltage is removed from the input. The OFF/ON time periods are independently selectable within the same range.
|
120 Volts AC/DC, 0.1 to 102.3 Minutes in 0.1 Sec. Increments
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Voltage Monitoring Relay with a DPDT Contact Form, a 10A Contact Current and a 120VAC.
|
On-Delay Time Delay Relay with a DPDT Contact Form, a 10A Current Rating and a 277VAC Voltage Rating.
|
Time Delay Relay with a DPDT Contact Form, a 10A Contact Current and a 120VAC Voltage Rating.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Time Delay Relay with a DPDT Contact Form, a 10A Contact Current and a 120VAC Voltage Rate.
|
Time Delay Relay with a DPDT Contact Form, a 10A Contact Current and a 270VAC Coil.
|
RELAY
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TIME DELAY RELAY .1 TO 1 SEC
|
RELAY
|
TIMER
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TIMER
|
RELAY
|
|
|
