Home > Test & Measurement > Miscellanous Meters > FLUKE-789 PROCESSMETER
	Our Price: $1,389.14 Price Per: Each Quantity in Stock:1 Product Code: FLUKE-789 Qty:

Description Specifications   Process Calibrator with Loop Power and a Multimeter The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it's even better, the range is extended with the Fluke 789 - the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less. How To Source 4-20 Milliamps Using The Fluke 789 ProcessMeter Specifications Current Measurement Range: 0-1 A AC or DC Resolution: 1 mA Accuracy: 0.2% + 2 LSD (DC) Range: 0-30 mA Resolution: 0.001 mA Accuracy: 0.05% + 2 LSD Current Sourcing Range: 0-20 mA or 4-20 mA Resolution: 0.05% of span Drive Capability: 24 V Compliance or 1200 Ω @ 20 mA Frequency to 19.999 kHz, 0.005% + 1 LSD Continuity Beeps for resistance < 100 Ω Voltage measurement Range: 0-1000 V AC (true-rms) or DC Resolution: 0.1 mV to 1.0 V Accuracy: 0.1% Rdg + 1 LSD (VDC) Resistance measurement to 40 MΩ, 0.2% + 1 LSD Diode test 2.0 V shows diode voltage drop Display current and % of span Yes Auto step, auto ramp Yes Environmental Specifications Operating Temperature -20 ºC to 55 ºC Storage Temperature -40 ºC to 60 ºC Humidity (Without Condensation) 95% up to 30 ºC 75% up to 40 ºC 45% up to 50 ºC 35% up to 55 ºC Temperature Coefficient 0.05 x (specified accuracy) per ºC (for temperatures < 18 ºC or > 28 ºC) Safety Specifications Electrical Safety Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92 Overvoltage category IEC 1010-1 CAT III 1000 V IEC 1010-1 CAT IV 600 V Maximum voltage 1000 V rms Mechanical & General Specifications Size 50 x 100 x 203 mm (1.25" H x 3.41"W x 7.35" L) Weight 610 g (1.6 lbs) Batteries 4 AA Alkaline batteries Warranty 3 years Battery Life 140 hours typical (measurement), 10 hours typical (sourcing 20 mA) Shock & Vibration Random, 2 g, 5-500 Hz 1 meter drop test Features 24 V Loop power supply Very large dual display Enhanced backlight with 2 brightness settings 1200 ohm drive capability on mA source HART mode setting with loop power and a built-in 250 ohm resistor 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check Externally accessible fuses for easy replacement Infrared-port to process data in FlukeView Forms (V2.1) software Fluke 789 features that are also included in the Fluke 787 Precision 1000 V, 440 mA True-RMS digital Multimeter 0.1% dc voltage accuracy 0.05% dc current accuracy Frequency measurement to 20 kHz Min/Max/Average/Hold/Relative modes Diode Test and Continuity Beeper Simultaneous mA and % of scale readout 20 mA DC current source / loop calibrator / simulator Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp Externally accessible battery for easy battery changes Accessories TL81A; DELUXE ELECTRONIC TEST LEAD SET i410 AC/DC Current Clamp TPAK; TOOLPAK C510; LEATHER METER CASE Our Price: $216.99 Our Price: $329.99 Our Price: $54.99 Our Price: $104.99 Related Items Amprobe LM-100 Light Meter FLUKE-279-FC-IFLEX True-rms Thermal DMM with iFlex Amprobe TACH-10 Contact and Non-Contact Tachometer Amprobe LM-120 Light Meter Our Price: $215.99 Our Price: $1,399.99 Our Price: $247.99 Our Price: $270.99 FLUKE-1587 FC INSULATION/MULTIMETER SM-10 SOUND METER FLUKE-1503 INSULATION TESTER GSD600 GAS LEAK DETECTOR FOR METHANE AND PROPANE Our Price: $1,038.99 Our Price: $386.99 Our Price: $679.59 Our Price: $294.99

Share your knowledge of this product. Be the first to write a review »