Home > Networking >

065-1196SFPDR; 10/100/1000TX to 100/1000X SFP Media Converter

Signamax 065-1196SFPDR
 
Our Price: $401.14
Sale Price: $259.00
Savings: $142.14
Price Per: Each

Quantity in Stock:1

Product Code: FO-065-1196SFPDR
Qty:

Description
 
Dual-Rate 1000Base or 100Base SFP capability
Extremely low latency supports larger multi-hop networks
Extremely high reliability; MTBF of over 212 years
Gigabit transmission supports 9K bytes jumbo frames
IEEE 802.3x flow control for full duplex and back pressure for half duplex supported
DIP switch configuration for link fault signalling, fiber auto/force mode, and SFP speed
Full wire-speed forwarding rate
Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis
Features
  • APPLICABLE STANDARDS
  • IEEE 802.3 10BaseT
  • IEEE 802.3u 100BaseTX
  • IEEE 802.3ab 1000BaseT
  • IEEE 802.3z 1000BaseSX
  • IEEE 802.3z 1000BaseLX
  • IEEE 802.3x Flow Control
  • PORTS
  • 1 – RJ-45 10/100/10000BaseT/TX port plus
  • 1 -Dual-rate 1000Base or 100Base SFP port
  • LED STATUS INDICATORS
  • Per Unit: Power; LFS Status; Full Duplex
  • Per RJ-45 Port: Link Copper; Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps)
  • Per SFP Port: Link Fiber
  • PERFORMANCE
  • Latency: ≤1.6 μs (FIFO).
  • MTBF: 1,857,775.35 hours (212.07 years), calculated via the Part Stress Analysis Method.
  • Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets); @ 100Base: 148,810 pps (64-byte packets)
  • Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance)
  • Frame Buffer: 12K total
  • Jumbo Frame Support: 9K packets supported
  • DIP SWITCH SETTINGS
  • No. Down Up Notes
  • 1 Disable LFS Enable LFS LFS: Link Fault Signaling function
  • 2 Enable Auto-Negotiation for TX port Enable Force mode for TX port
  • 3 TX port Force mode: Full-duplex TX port Force mode: Half-duplex
  • 4 TX port Force mode: 100 Mbps TX port Force mode: 10 Mbps
  • 5 SFP at 100 Mbps SFP at 1000 Mbps
  • 6 Function reserved Function reserved
  • ELECTRICAL CHARACTERISTICS
  • 12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.
  • ENVIRONMENTAL REQUIREMENTS
  • Operating Temperature: 32°F to 122°F (0°C to 50°C)
  • Storage Temperature: -14°F to 158°F (-10°C to 70°C)
  • Relative Humidity: 5% to 95% (non-condensing)
  • PHYSICAL CHARACTERISTICS
  • Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm)
  • Weight: 0.33 lb (150 g)
  • CERTIFICATIONS
  • CE, FCC, ROHS, VCCI Class A
  • WARRANTY
  • Limited Lifetime

Share your knowledge of this product. Be the first to write a review »