Indoor desktop omni-directional antenna ANT2405C operates in the 2.4-2.5 GHz band and provides 5dBi omni-directional operation, which largely extends the wireless range and delivers much better wireless performance. The antenna offers the RP-SMA Male (Plug) connector guaranteeing wider compatibility with most of the wireless equipments. Replacing your wifi antenna with ANT2405C will significantly increase the range and strength of your wifi signal. This quality built omni-directional antenna is a direct replacement for the antenna that comes standard with your router, access point. Because it is omni-directional, no aiming is required - it can send and receive wifi in all directions. Installation is very easy - just detach your device's factory antenna and attach our booster antenna and you'll experience an instant increase in signal coverage and stability. Please note that the increase in signal strength depends mostly on your router or adapter; upgrading the antennas helps but the signal cannot transmit or receive at a level that your modem or adapter does not have.
It complies with the IEEE 802.11n standard with wireless transmission speeds of up to 300M. The router features 4 10/100Mbps ports to achieve the most effective data transmission. It adopts MIMO, has three fixed Omni directional antennas providing even better wireless performance, transmission rates, stability and coverage. CCA technology automatically avoids channel conflicts using its channel selection feature. It also works well with other 11g and 11n protocol wireless products. The WR940N provides multiple security measures; supporting SSID broadcast control, MAC address access control, WEP encryption, WPA/WPA2, and WPA-PSK/WPA2-PSK authentication. At the same time QSS(Quick Secure Setup)complies with WPS allowing for worry-free wireless security configuration. These combined security features will guard against intruders using stronger, safer protection.